Lectures

• Introduction to Fiber Optics:
  • Fundamentals
  • Theory
  • History
  • Performance Characteristics
  • System Components including Transmitters, Receivers
• Fiber Optic Installation Practices:
  • Optical Networks
  • Techniques, Standards & Codes
  • Cable Types
  • Connectors
  • Splicing
  • Enclosures & Panels
  • Tools & Test Equipment
  • System Design & Loss Budgets: Equipment, Techniques & Applications
• Fiber Optics for PRO Audio/Video:
  • AV connector Fundamentals
  • Internet Video
  • 10 Gigabit Networking
  • CATV over Twisted Pair
  • Digital Signage
  • Multiple Matrix Multiple Display
  • Fiber Optic AV Signal distribution
  • Fiber Optic AV System Design
  • Digital Signage
  • Extenders
  • Audio and Control Products
  • Distribution Amplifiers
  • Switchers
  • Signal Processors
  • Matrix Switchers
  • Cables, Connectors

Labs

In addition to the labs performed in the Certified Fiber Optic Installer course, students will also perform the following industry-specific labs:

Lab 1 Splice-on Connector Installation (TL-03C)

1. To understand how to adapt a fusion splicer for a generic splice-on connector.
2. To demonstrate the ability to adapt fiber strip measurements to any fusion splicer.
3. To perform a visual inspection when completed and properly test to TIA Tier 1 standard.

Lab 2 Wall-mount Segment Assembly (Pigtails) (TL-12A)

1. Properly prepare a 12F distribution style cable for installation to wall Mount enclosures.
2. Properly perform one of the most basic Splicers’ tasks, fusion splicing of “Pigtails”.
3. Demonstrate the proper way to strip, clean, cleave, and fusion splice 900μm fiber.
4. Properly wrap (form & dress) the fused fibers back into the splice holders.
5. Test the completed assembly to TIA Tier 1 standard.

Lab 3 Testing SMPTE (Society of Motion Picture and Television Engineers) Links (TL-22C)

1. Inspect, test, and analyze two SMPTE cable configurations representative of a typical SMPTE fiber link incorporating a mated pair such as 2 SMPTE assemblies mated together.
2. Inspect, test and analyze a SMPTE fiber link incorporating a panel mount receptacle or bulkhead as typically found in wall outlets of panel racks.
3. Perform a Visual Physical Inspection of the SMPTE test assembly
4. Properly cleaning and inspect all fiber endfaces prior to mating.
5. Have an understanding of how SMPTE connectors can be disassembled and repaired.

Prerequisites: None

Knowledge or experience in the areas of Fiber Optic Advantages and Applications, Cables, Connectors and Terminations, Enclosures and Panels, and Test Equipment would be helpful, but is not required.

Target Audience

This course is excellent for anyone involved in the fiber optics for Pro Audio/Video environments and anyone who designs, installs, maintains, or tests fiber optic cabling systems.